基于keepalived双vip的MySQL高可用集群

Posted on by hackdl

一、机器准备及IP地址规划

ansible  2.9.27 ip:192.168.1.124
prometheus 192.168.1.103
MySQL Router 8.0.32

mysql集群
master 192.168.1.150
slave  192.168.1.151
slave  192.168.1.152
延迟备份 backup  192.168.1.153

keepalived集群
192.168.1.148
192.168.1.149
项目名称：基于MySQLrouter、keepalived双vip的MySQL高可用集群
项目环境：8台服务器（1G，1核），centos7.9  mysq5.7.35  mysqlrouter8.0.28  keepalived1.3.5  zabbix ansible
项目描述：
        本项目的目的是构建一个高可用的能实现读写分离的高效的MySQL集群，确保业务的稳定，能沟通方便的监控整个集群，同时能批量的去部署和管理整个集群。

项目步骤：
      1.安装好centos7.8的系统，部署好ansible，在所有的机器之间配置SSH免密通道
      2.部署好zabbix监控系统
      3.通过ansible去以二进制方式安装部署MySQL，主要是通过编写好的脚本一键安装二进制版本的MySQL。
      4.使用ansible安装mysqlrouter 和keepalived，在另外2台中间件服务器上，实现读写分离和高可用，在keepalived上配置2个实例，实现2个vip，互为master和backup，更加好的提升高可用的性能。
      5.在3台MySQL服务器上配置好主从复制，建立读写分离使用的用户，形成一个master+2个slave节点(半同步+GTID)的集群，提供数据库服务，部署一台延迟备份的服务器（延迟30s）
      6.尝试部署mysql的MHA，实现自动的故障切换，确保master宕机，能自动提升另外一台slave为主
      7.验证测试读写分离和高可用以及主从的failover
      8.使用压力测试软件（sysbench）测试整个MySQL集群的性能（cpu、IO、内存等）
项目心得：
	  1.ip地址配置桥接，而且是静态ip比较好
      2.一定要规划好整个集群的架构，配置要细心，脚本要提前准备好，边做边修改
      3.防火墙和selinux的问题应该关闭
      4.对MySQL的集群、读写分离、故障切换和高可用有了深入的理解
      5.prometheus监控软件和ansible自动化运维工具更加熟练
      6.keepalived的配置需要更加细心

二、使用ansible部署MySQL集群

1、建立免密通道
[root@ansible ansible]# ssh-keygen  #生成密钥，默认回车即可
[root@ansible ansible]# ssh-copy-id root@192.168.1.150   #拷贝密钥至master
[root@ansible ansible]# ssh-copy-id root@192.168.1.151   #拷贝密钥至slave1
[root@ansible ansible]# ssh-copy-id root@192.168.1.152   #拷贝密钥至slave2
[root@ansible ansible]# ssh-copy-id root@192.168.1.153   #拷贝密钥至backup
2、安装ansible
[root@ansible ansible]# yum install epel-release -y
[root@ansible ansible]# yum install ansible -y
[root@ansible ansible]# cat hosts 
[mysql]
192.168.1.150
192.168.1.151
192.168.1.152
192.168.1.153

[root@ansible ansible]# ansible mysql -m ping
192.168.1.150 | SUCCESS => {
    "ansible_facts": {
        "discovered_interpreter_python": "/usr/bin/python"
    }, 
    "changed": false, 
    "ping": "pong"
}
192.168.1.152 | SUCCESS => {
    "ansible_facts": {
        "discovered_interpreter_python": "/usr/bin/python"
    }, 
    "changed": false, 
    "ping": "pong"
}
192.168.1.151 | SUCCESS => {
    "ansible_facts": {
        "discovered_interpreter_python": "/usr/bin/python"
    }, 
    "changed": false, 
    "ping": "pong"
}
192.168.1.153 | SUCCESS => {
    "ansible_facts": {
        "discovered_interpreter_python": "/usr/bin/python"
    }, 
    "changed": false, 
    "ping": "pong"
}
[root@ansible ansible]# 
# 以上结果就说明，ansible已经全部安装成功并且连接成功。
3、使用ansible部署MySQL集群
# 编写一键安装MySQL脚本，如下：
[root@ansible ansible]# cat onekey_install_mysql_binary.sh 
#!/bin/bash
#解决软件的依赖关系
yum  install cmake ncurses-devel gcc  gcc-c++  vim  lsof bzip2 openssl-devel ncurses-compat-libs -y
#mkdir /mysql
cd /mysql 
#解压mysql二进制安装包
tar  xf  mysql-5.7.35-linux-glibc2.12-x86_64.tar.gz
#移动mysql解压后的文件到/usr/local下改名叫mysql
mv mysql-5.7.35-linux-glibc2.12-x86_64 /usr/local/mysql
#新建组和用户 mysql
groupadd mysql
#mysql这个用户的shell 是/bin/false 属于mysql组 
useradd -r -g mysql -s /bin/false mysql
#关闭firewalld防火墙服务，并且设置开机不要启动
service firewalld stop
systemctl  disable  firewalld
#临时关闭selinux
setenforce 0
#永久关闭selinux
sed -i '/^SELINUX=/ s/enforcing/disabled/'  /etc/selinux/config
#新建存放数据的目录
mkdir  /data/mysql -p
#修改/data/mysql目录的权限归mysql用户和mysql组所有，这样mysql用户可以对这个文件夹进行读写了
chown mysql:mysql /data/mysql/
#只是允许mysql这个用户和mysql组可以访问，其他人都不能访问
chmod 750 /data/mysql/
#进入/usr/local/mysql/bin目录
cd /usr/local/mysql/bin/
#初始化mysql
./mysqld  --initialize --user=mysql --basedir=/usr/local/mysql/  --datadir=/data/mysql  &>passwd.txt
#让mysql支持ssl方式登录的设置
./mysql_ssl_rsa_setup --datadir=/data/mysql/
#获得临时密码
tem_passwd=$(cat passwd.txt |grep "temporary"|awk '{print $NF}')
  #$NF表示最后一个字段
  # abc=$(命令)  优先执行命令，然后将结果赋值给abc 
# 修改PATH变量，加入mysql bin目录的路径
#临时修改PATH变量的值
export PATH=/usr/local/mysql/bin/:$PATH
#重新启动linux系统后也生效，永久修改
echo  'PATH=/usr/local/mysql/bin:$PATH' >>/root/.bashrc
#复制support-files里的mysql.server文件到/etc/init.d/目录下叫mysqld
cp  ../support-files/mysql.server   /etc/init.d/mysqld
#修改/etc/init.d/mysqld脚本文件里的datadir目录的值
sed  -i '70c  datadir=/data/mysql'  /etc/init.d/mysqld
#生成/etc/my.cnf配置文件
cat  >/etc/my.cnf  
EOF
#修改内核的open file的数量
ulimit -n 1000000
#设置开机启动的时候也配置生效
echo "ulimit -n 1000000" >>/etc/rc.local
chmod +x /etc/rc.d/rc.local
#启动mysqld进程
service mysqld start
#将mysqld添加到linux系统里服务管理名单里
/sbin/chkconfig --add mysqld
#设置mysqld服务开机启动
/sbin/chkconfig mysqld on
#初次修改密码需要使用--connect-expired-password 选项
#-e 后面接的表示是在mysql里需要执行命令  execute 执行
#set password='Sanchuang123#';  修改root用户的密码为Sanchuang123#
mysql -uroot -p$tem_passwd --connect-expired-password   -e  "set password='Sanchuang123#';"
#检验上一步修改密码是否成功，如果有输出能看到mysql里的数据库，说明成功。
mysql -uroot -p'Sanchuang123#'  -e "show databases;"
# 使用ansible将mysql源码传过去。
[root@ansible ansible]# ansible  mysql -m copy -a 'src=/ansible/mysql-5.7.35-linux-glibc2.12-x86_64.tar.gz dest=/mysql/'

# 使用ansible编写playbook执行安装。
[root@ansible ansible]# cat onekey_install_mysql.yaml 
---
- name: 安装mysql
  hosts: mysql
  gather_facts: yes   
  tasks:   
    - name: 安装mysql
      script: /ansible/onekey_install_mysql_binary.sh 
[root@ansible ansible]# ansible-playbook onekey_install_mysql.yaml 


# 至此MySQL集群已经搭建完成。

二、mysqlrouter读写分离部署实现

MySQL Router是一个MySQL官方提供的开源软件，用于管理和路由MySQL数据库的连接。它可以作为中间层在客户端和MySQL服务器之间进行负载均衡、故障转移和读写分离等操作，提高了MySQL数据库的可伸缩性和高可用性。MySQL Router支持多种协议，包括TCP/IP、HTTP、JDBC和ODBC等，可以与许多不同的客户端应用程序集成使用。此外，MySQL Router还提供了丰富的监控和管理功能，帮助管理员轻松维护和管理MySQL环境。

1、准备两台全新的linux服务器，安装好mysqlrouter软件

proxy-1 ：192.168.1.148
proxy-2： 192.168.1.149

2、修改mysqlrouter的配置文件

proxy-1配置如下

[DEFAULT]
user = mysql
logging_folder = /data/mysql/mysql-router-8.0.28/log
plugin_folder = /data/mysql/mysql-router-8.0.28/lib/mysqlrouter
runtime_folder = /data/mysql/mysql-router-8.0.28/run
data_folder = /data/mysql/mysql-router-8.0.28/data

[logger]
level = INFO
filename = mysqlrouter.log

# 名字可以自定义
[routing:read_write]
bind_address = 0.0.0.0 #将mysqlroute绑定的IP地址改为0.0.0.0，本机任意ip地址都能访问
bind_port = 7001
#支持可读可写
mode = read-write
#mysql-master服务器的ip地址：mysql服务的端口号
destinations = 192.168.1.150:3306
max_connections = 65535
max_connect_errors = 100
client_connect_timeout = 9

[routing:read_only]
bind_address = 0.0.0.0
bind_port = 7002
# 仅可读
mode = read-only
# mysql-slave服务器的ip地址：mysql服务的端口号
destinations = 192.168.1.150:3306,192.168.1.151:3306,192.168.1.152:3306
max_connections = 65535
max_connect_errors = 100
client_connect_timeout = 9

proxy-2配置如下

[DEFAULT]
user = mysql
logging_folder = /data/mysql/mysql-router-8.0.28/log
plugin_folder = /data/mysql/mysql-router-8.0.28/lib/mysqlrouter
runtime_folder = /data/mysql/mysql-router-8.0.28/run
data_folder = /data/mysql/mysql-router-8.0.28/data

[logger]
level = INFO
filename = mysqlrouter.log

# 名字可以自定义
[routing:read_write]
bind_address = 0.0.0.0
bind_port = 7001
#支持可读可写
mode = read-write
#mysql-master服务器的ip地址：mysql服务的端口号
destinations = 192.168.1.150:3306
max_connections = 65535
max_connect_errors = 100
client_connect_timeout = 9

[routing:read_only]
bind_address = 0.0.0.0
bind_port = 7002
# 仅可读
mode = read-only
# mysql-slave服务器的ip地址：mysql服务的端口号
destinations = 192.168.1.150:3306,192.168.1.151:3306,192.168.1.152:3306
max_connections = 65535
max_connect_errors = 100
client_connect_timeout = 9
3、启动MySQLrouter
[root@keep-02 conf]# mysqlrouter -c /data/mysql/mysql-router-8.0.28/conf/mysqlrouter.conf

三、master和slave实现异步复制

安装mysql

配置一台master和两台slave以及一台backup。

可以使用编译安装也可以使用yum安装，yum安装需要先安装epel源。

由于有4台机器，可以使用ansible批量安装。

安装epel源
yum install -y epel-release
yum安装mysql
yum -y install mysql-server

安装完mysql后，启动MySQL服务

service mysqld start
#开机启动
systemctl enable mysqld.service

1.首先使用msyqldump将master中的所有数据导出，然后在slave上面备份，防止主库和从库数据不一致

mysqldump -uroot -p'xzx527416' --all-databases >/backup/all_sql.db
#此时切换到/backup目录，可以看到备份文件all_sql.db

2.使用scp将备份文件all_sql.db传到slave1和slave2以及backup机器上。(也可以使用ansible)

scp /backup/all_sql.db 192.168.1.151:/root
scp /backup/all_sql.db 192.168.1.152:/root
scp /backup/all_sql.db 192.168.1.153:/root

slave和backup导入数据

[root@localhost ~] mysql -uroot -p'xzx527416'

3.master和slave开启二进制日志和server_id

master配置：

# binary log
log_bin
server_id = 1

slave1配置

# 二进制日志
log-bin
server_id = 2

slave2配置

# 开启二进制日志
log_bin
server_id = 3

backup_server配置

# 开启二进制日志
log_bin
server_id = 4

4.在master上创建一个有备份权限的用户，然后在slave上添加授权用户信息。

root@mysql 10:31  mysql>create user 'xu'@'%' identified by '123456';
Query OK, 0 rows affected (1.01 sec)
 
root@mysql 10:40  mysql>grant replication slave on *.* to 'xu'@'%';
Query OK, 0 rows affected (0.00 sec)

查看master状态信息。

root@(none) 18:06  mysql>show master status;
+----------------------+----------+--------------+------------------+--------------------------------------------+
| File                 | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set                          |
+----------------------+----------+--------------+------------------+--------------------------------------------+
| localhost-bin.000008 |      194 |              |                  | cc75c304-cd41-11ed-889b-000c290990b9:1-214 |
+----------------------+----------+--------------+------------------+--------------------------------------------+
1 row in set (0.00 sec)

在slave和backup上添加此授权用户信息

root@(none) 16:07  mysql>CHANGE MASTER TO MASTER_HOST='192.168.1.150' ,
    -> MASTER_USER='xu',
    -> MASTER_PASSWORD='123456',
    -> MASTER_PORT=3306,
    -> MASTER_LOG_FILE='master-bin.000008',
    -> MASTER_LOG_POS=194;
Query OK, 0 rows affected, 2 warnings (0.01 sec)

在slave上面开启I/O线程和sql线程

start slave
root@(none) 18:39  mysql>show slave statusG;
*************************** 1. row ***************************
               Slave_IO_State: Waiting for master to send event
                  Master_Host: 192.168.1.150
                  Master_User: xu
                  Master_Port: 3306
                Connect_Retry: 60
              Master_Log_File: localhost-bin.000008
          Read_Master_Log_Pos: 194
               Relay_Log_File: localhost-relay-bin.000002
                Relay_Log_Pos: 324
        Relay_Master_Log_File: localhost-bin.000008
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes

测试：

master上删除数据库

root@(none) 18:38  mysql>show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| mysqlslap          |
| performance_schema |
| sc                 |
| sys                |
| xw                 |
+--------------------+
7 rows in set (0.00 sec)

root@(none) 18:42  mysql>drop database xw;
Query OK, 0 rows affected (0.01 sec)

root@(none) 18:42  mysql>show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| mysqlslap          |
| performance_schema |
| sc                 |
| sys                |
+--------------------+

从库中的这个数据库也被删掉了

root@(none) 18:40  mysql>show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| mysqlslap          |
| performance_schema |
| sc                 |
| sys                |
+--------------------+
6 rows in set (0.00 sec)

到这里就完成了异步复制

四、基于GTID的主从复制

1.关闭slave上的服务

stop slave

2.配置master和slave的配置文件。

gtid-mode=on
enforce-gtid-consistency = on

3.重启master和slave的mysql服务

service mysqld restart

五、为backup配置延迟备份

1.关闭backup上的slave服务

stop slave

2.在backup_server上设置延迟时间，然后开启slave,这里设置30秒

CHANGE MASTER TO MASTER_DELAY = 30;
start slave;
show slave statusG;

3.测试效果

master上删除数据库

root@(none) 19:17  mysql>drop database sc;
Query OK, 2 rows affected (0.02 sec)

30秒后，backup上的才删掉，而slave的马上就删掉了。

#这里是backup的mysql
root@(none) 19:13  mysql>show databases; 
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| mysqlslap          |
| performance_schema |
| sys                |
+--------------------+
5 rows in set (0.01 sec)

六、搭建双vip高可用集群

1、搭建过程
# 同样是做mysqlrouter的两台机器做高可用
keepalived-1 ：192.168.1.148
keepalived-2： 192.168.1.149

keep-01 操作：

[root@keep-01 /]# yum install keepalived -y
[root@keep-01 keepalived]# cd /etc/keepalived/
[root@keep-01 keepalived]# ls
keepalived.conf
[root@keep-01 keepalived]# vim keepalived.conf 
[root@keep-01 keepalived]# cat keepalived.conf 
! Configuration File for keepalived

global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 192.168.200.1
   smtp_connect_timeout 30
   router_id LVS_DEVEL
   vrrp_skip_check_adv_addr
   #vrrp_strict
   vrrp_garp_interval 0
   vrrp_gna_interval 0
}

vrrp_instance VI_1 {
    state MASTER
    interface ens33
    virtual_router_id 58
    priority 120
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.1.240
    }
}
vrrp_instance VI_2 {
    state BACKUP
    interface ens33
    virtual_router_id 59
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.1.241
    }
}
[root@keep-01 keepalived]#

keep-02操作：

[root@keep-02 /]# yum install keepalived -y
[root@keep-02 /]# cd /etc/keepalived/
[root@keep-02 keepalived]# ls
keepalived.conf
[root@keep-02 keepalived]# vim keepalived.conf 
[root@keep-02 keepalived]# cat keepalived.conf 
! Configuration File for keepalived

global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 192.168.200.1
   smtp_connect_timeout 30
   router_id LVS_DEVEL
   vrrp_skip_check_adv_addr
   #vrrp_strict
   vrrp_garp_interval 0
   vrrp_gna_interval 0
}

vrrp_instance VI_1 {
    state BACKUP
    interface ens33
    virtual_router_id 58
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.1.240
    }
}
vrrp_instance VI_2 {
    state MASTER
    interface ens33
    virtual_router_id 59
    priority 120
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
       192.168.1.241
    }
}
[root@keep-02 keepalived]#
2、启动keepalived
[root@keep-01 keepalived]# service keepalived restart
Redirecting to /bin/systemctl restart keepalived.service
[root@keep-01 keepalived]# ps aux | grep keepalived
root       4728  0.0  0.1 123012  1408 ?        Rs   18:35   0:00 /usr/sbin/keepalived -D
root       4729  0.0  0.2 127212  2452 ?        S    18:35   0:00 /usr/sbin/keepalived -D
root       4730  0.0  0.2 127212  2468 ?        S    18:35   0:00 /usr/sbin/keepalived -D
root       4740  0.0  0.0 112824   980 pts/0    R+   18:35   0:00 grep --color=auto keepalived
# 第二台keepalived同样的操作
3、双VIP效果
# keep-01效果
[root@keep-01 keepalived]# ip a
1: lo:  mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33:  mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:bf:65:64 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.148/24 brd 192.168.1.255 scope global noprefixroute dynamic ens33
       valid_lft 4193sec preferred_lft 4193sec
    inet 192.168.1.240/32 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::803c:dca6:b254:e8a4/64 scope link tentative noprefixroute dadfailed 
       valid_lft forever preferred_lft forever
    inet6 fe80::eb4c:4d26:bf10:da92/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
[root@keep-01 keepalived]# 

# keep-02效果
[root@keep-02 keepalived]# ip a
1: lo:  mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33:  mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:3c:25:77 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.149/24 brd 192.168.1.255 scope global noprefixroute dynamic ens33
       valid_lft 4194sec preferred_lft 4194sec
    inet 192.168.1.241/32 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::eb4c:4d26:bf10:da92/64 scope link tentative noprefixroute dadfailed 
       valid_lft forever preferred_lft forever
    inet6 fe80::803c:dca6:b254:e8a4/64 scope link tentative noprefixroute dadfailed 
       valid_lft forever preferred_lft forever
    inet6 fe80::bac:77c2:cf4a:8b22/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
[root@keep-02 keepalived]# 

# 至此双VIP效果已经实现。

七、搭建监控系统

1、安装Prometheus
第1步：安装prometheus server
源码安装
1.上传下载的源码包到linux服务器
[root@sc-prom ~]# mkdir /prom
[root@sc-prom ~]# cd /prom
[root@sc-prom prom]# ls
prometheus-2.34.0.linux-amd64.tar.gz
[root@sc-prom prom]#
2.解压源码包
[root@sc-prom prom]# tar xf prometheus-2.34.0.linux-amd64.tar.gz
[root@sc-prom prom]# ls
prometheus-2.34.0.linux-amd64  prometheus-2.34.0.linux-amd64.tar.gz
[root@sc-prom prom]#
3.修改解压后的压缩包名字
[root@sc-prom prom]# mv prometheus-2.34.0.linux-amd64 prometheus
[root@sc-prom prom]# ls
prometheus  prometheus-2.34.0.linux-amd64.tar.gz
[root@sc-prom prom]#
# 临时和永久修改PATH变量，添加prometheus的路径
[root@sc-prom prometheus]# PATH=/prom/prometheus:$PATH
[root@sc-prom prometheus]# cat /root/.bashrc
# .bashrc

# User specific aliases and functions

alias rm='rm -i'
alias cp='cp -i'
alias mv='mv -i'

# Source global definitions
if [ -f /etc/bashrc ]; then
	. /etc/bashrc
fi
PATH=/prom/prometheus:$PATH   #添加
执行prometheus程序
[root@prometheus prometheus]# nohup prometheus  --config.file=/prom/prometheus/prometheus.yml &
[1] 8431
[root@prometheus prometheus]# nohup: 忽略输入并把输出追加到"nohup.out"

[root@prometheus prometheus]# 
# 查看prometheus的进程
[root@prometheus prometheus]# ps aux|grep prome  
root       8431  4.5  2.4 782084 46204 pts/0    Sl   11:21   0:00 prometheus --config.file=/prom/prometheus/prometheus.yml
root       8439  0.0  0.0 112824   980 pts/0    S+   11:21   0:00 grep --color=auto prome
[root@prometheus prometheus]# 

# 查看prometheus监听的端口号
[root@prometheus prometheus]# netstat -anplut|grep prome
tcp6       0      0 :::9090                 :::*                    LISTEN      8431/prometheus     
tcp6       0      0 ::1:9090                ::1:51738               ESTABLISHED 8431/prometheus     
tcp6       0      0 ::1:51738               ::1:9090                ESTABLISHED 8431/prometheus
2、访问测试

3、节点安装和启动node-exporter
1.下载node_exporter-1.4.0-rc.0.linux-amd64.tar.gz源码，上传到节点服务器上
2.解压
[root@keep-01 ~]# ls
anaconda-ks.cfg  node_exporter-1.4.0-rc.0.linux-amd64.tar.gz
[root@keep-01 ~]# tar xf node_exporter-1.4.0-rc.0.linux-amd64.tar.gz
[root@keep-01 ~]# ls
node_exporter-1.4.0-rc.0.linux-amd64         
node_exporter-1.4.0-rc.0.linux-amd64.tar.gz  
单独存放到/node_exporter文件夹
[root@keep-01 ~]# mv node_exporter-1.4.0-rc.0.linux-amd64 /node_exporter
[root@keep-01 ~]#
[root@keep-01 ~]# cd /node_exporter/
[root@keep-01 node_exporter]# ls
LICENSE  node_exporter  NOTICE
[root@keep-01 node_exporter]#

# 修改PATH变量
[root@keep-01 node_exporter]# PATH=/node_exporter/:$PATH
[root@keep-01 node_exporter]# vim /root/.bashrc 
[root@keep-01 node_exporter]# tail -1 /root/.bashrc 
PATH=/node_exporter/:$PATH

# 执行node exporter 代理程序agent
[root@keep-01 node_exporter]# nohup node_exporter --web.listen-address 0.0.0.0:8090  &
[root@keep-01 node_exporter]# ps aux | grep node_exporter 
root      64281  0.0  2.1 717952 21868 pts/0    Sl   19:03   0:04 node_exporter --web.listen-address 0.0.0.0:8090
root      82787  0.0  0.0 112824   984 pts/0    S+   20:46   0:00 grep --color=auto node_exporter
[root@keep-01 node_exporter]# netstat -anplut | grep 8090
tcp6       0      0 :::8090                 :::*                    LISTEN      64281/node_exporter 
tcp6       0      0 192.168.17.152:8090     192.168.17.156:43576    ESTABLISHED 64281/node_exporter 
[root@lb-1 node_exporter]# 

# 其他节点一样的配置，这里可以使用ansible部署。
4、测试访问

5、在prometheus server里添加node节点
[root@prometheus prometheus]# pwd
/prom/prometheus
[root@prometheus prometheus]# cat prometheus.yml 
# my global config
global:
  scrape_interval: 15s # Set the scrape interval to every 15 seconds. Default is every 1 minute.
  evaluation_interval: 15s # Evaluate rules every 15 seconds. The default is every 1 minute.
  # scrape_timeout is set to the global default (10s).

# Alertmanager configuration
alerting:
  alertmanagers:
    - static_configs:
        - targets:
          # - alertmanager:9093

# Load rules once and periodically evaluate them according to the global 'evaluation_interval'.
rule_files:
  # - "first_rules.yml"
  # - "second_rules.yml"

# A scrape configuration containing exactly one endpoint to scrape:
# Here it's Prometheus itself.
scrape_configs:
  # The job name is added as a label `job=` to any timeseries scraped from this config.
  - job_name: "prometheus"
    static_configs:
      - targets: ["localhost:9090"]
  - job_name: "keepalived-01"
    static_configs:
      - targets: ["192.168.1.148:8090"]
  - job_name: "keepalived-02"
    static_configs:
      - targets: ["192.168.1.149:8090"]
  - job_name: "mysql-master"
    static_configs:
      - targets: ["192.168.1.150:8090"]
  - job_name: "mysql-slave1"
    static_configs:
      - targets: ["192.168.1.151:8090"]
  - job_name: "mysql-slave2"
    static_configs:
      - targets: ["192.168.1.152:8090"]
[root@prometheus prometheus]#
6、测试访问

7、安装grafana
# 直接导入grafana安装包，用yum下载
[root@prometheus yum.repos.d]# cd /grafana/
[root@prometheus grafana]# ls
grafana-enterprise-9.1.2-1.x86_64.rpm
[root@prometheus grafana]# yum install grafana-enterprise-9.1.2-1.x86_64.rpm -y

# 重启grafana-server 默认监听的端口为3000
[root@prometheus grafana]# service grafana-server start
Starting grafana-server (via systemctl):                   [  确定  ]
[root@prometheus grafana]# netstat -anplut | grep grafana
tcp        0      0 192.168.17.156:55100    34.120.177.193:443      ESTABLISHED 12270/grafana-serve 
tcp6       0      0 :::3000                 :::*                    LISTEN      12270/grafana-serve
8、监控展示

八、测试

[root@ansible ~]# mysql -h 192.168.1.240 -P 7001 -uread-write -p'123456'
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor.  Commands end with ; or g.
Your MySQL connection id is 20
Server version: 5.7.35-log MySQL Community Server (GPL)

Copyright (c) 2000, 2021, Oracle and/or its affiliates.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or 'h' for help. Type 'c' to clear the current input statement.

read-write@(none) 20:30  mysql>
mysql -h 192.168.1.241 -P 7002 -uread-only -p'123456'
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor.  Commands end with ; or g.
Your MySQL connection id is 22
Server version: 5.7.35-log MySQL Community Server (GPL)

Copyright (c) 2000, 2021, Oracle and/or its affiliates.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or 'h' for help. Type 'c' to clear the current input statement.

使用sysbench可以进行压力测试

服务器托管，北京服务器托管，服务器租用 http://www.fwqtg.net
机房租用，北京机房租用，IDC机房托管， http://www.e1idc.net

服务器托管，北京服务器托管，服务器租用，机房机柜带宽租用

服务器托管

咨询：董先生

电话13051898268 QQ/微信93663045！

上一篇:
下一篇: