前言:本次部署采用系统的是Centos 8-Stream版,存储库为OpenStack-Victoria版,除基础配置,五大服务中的时间同步服务,七大组件中的nova服务,neutron服务,cinder服务需要在双节点配置外,其他服务配置均在控制节点,neutron配置从公有网络和私有网络中选择一种即可,大多数情况还是选公有网络的配置,此次部署所有密码均为111111,可按自身需要自行配置
安装环境:
- 采用虚拟化软件:VMware Workstation 16 Pro
- 操作系统:Centos 8-Stream
- 控制节点配置:内存4G,CPU4核,磁盘100G,启用虚拟化引擎
- 计算节点配置:内存4G,CPU4核,磁盘100G,启用虚拟化引擎
基础配置(双节点)
Yum源仓库配置
阿里云镜像仓库地址:https://mirrors.aliyun.com,有需要可自行配置,但是这里用不到
(1) 配置Centos 8的源只需改yum仓库.repo文件参数即可如下
#更改CentOS-Stream-AppStream.repo文件,将baseurl参数中的地址改为https://mirrors.aliyun.com
[root@localhost ~]# cd /etc/yum.repos.d/
[root@localhost yum.repos.d]# vi CentOS-Stream-AppStream.repo
[appstream]
name=CentOS Stream $releasever - AppStream
#mirrorlist=http://mirrorlist.centos.org/? release=$stream&arch=$basearch&repo=AppStream&infra=$infra
baseurl=https://mirrors.aliyun.com/$contentdir/$stream/AppStream/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
#更改CentOS-Stream-BaseOS.repo 文件,将baseurl参数中的地址改为https://mirrors.aliyun.com
[root@localhost yum.repos.d]# vi CentOS-Stream-BaseOS.repo
[baseos]
name=CentOS Stream $releasever - BaseOS
#mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=BaseOS&infra=$infra
baseurl=https://mirrors.aliyun.com/$contentdir/$stream/BaseOS/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
#更改CentOS-Stream-Extras.repo 文件,将baseurl参数中的地址改为https://mirrors.aliyun.com
[root@localhost yum.repos.d]# vi CentOS-Stream-Extras.repo
[extras]
name=CentOS Stream $releasever - Extras
#mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=extras&infra=$infra
baseurl=https://mirrors.aliyun.com/$contentdir/$stream/extras/$basearch/os/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
(2)配置openstack源
#在yum仓库文件夹下面创建openstack-victoria.repo文件
[root@localhost ~]# vi /etc/yum.repos.d/openstack-victoria.repo
#写入以下内容
[virctoria]
name=virctoria
baseurl=https://mirrors.aliyun.com/centos/8-stream/cloud/x86_64/openstack-victoria/
gpgcheck=0
enabled=1
(3)清除缓存,重建缓存
[root@controller ~]# yum clean all
[root@controller ~]# yum makecache
网络配置
- 控制节点双网卡——-> 仅主机IP:10.10.10.10 Net外网IP:10.10.20.10
- 计算节点双网卡——-> 仅主机IP:10.10.10.20 Net外网IP:10.10.20.20
(1)安装network网络服务
#安装network,由于8系统自带的服务为NetworkManager,它会与neutron服务有冲突,所以安装network,关闭NetworkManager,并设置disable状态
[root@localhost ~]# dnf -y install network-scripts
[root@localhost ~]# systemctl disable --now NetManager
#启动network服务,设为开机自启动
[root@localhost ~]# systemctl enable --now network
(2) 配置静态IP
#ens33,以控制节点为例
[root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens33
BOOTPROTO=static #修改
ONBOOT=yes #修改
IPADDR=10.10.10.10 #添加
NETMASK=255.255.255.0 #添加
#ens34,以控制节点为例
[root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens34
BOOTPROTO=static #修改
ONBOOT=yes #修改
IPADDR=10.10.20.10 #添加
NETMASK=255.255.255.0 #添加
GATEWAY=10.10.20.2 #添加
DNS1=8.8.8.8 #添加
DNS2=114.114.114.114 #添加
(3)重启网络,测试外网连通性
[root@localhost ~]# systemctl restart network
[root@localhost ~]# ping -c 3 www.baidu.com
主机配置
(1)修改主机名
#控制节点
[root@localhost ~]# hostnamectl set-hostname controller
[root@localhost ~]# bash
[root@controller ~]#
#计算节点
[root@localhost ~]# hostnamectl set-hostname compute
[root@localhost ~]# bash
[root@compute ~]#
(2)关闭防火墙
#关防火墙并设置disable开机禁启动
[root@controller ~]# systemctl disable --now firewalld
(3)关闭selinux安全子系统
#设置selinux并设置disable开机禁启动
[root@controller ~]# vi /etc/selinux/config
SELINUX=disabled
#可通过getenforce命令查看selinux状态
[root@controller ~]# getenforce
Disabled
(4)配置host主机映射
#控制节点
[root@controller ~]# cat >>etc/hosts 10.10.10.10 controller
> 10.10.10.20 computer
> EOF
#计算节点
[root@compute ~]# cat >>etc/hosts 10.10.10.10 controller
> 10.10.10.20 compute
> EOF
openstack存储库
#安装openstack-victoria版存储库
[root@controller ~]# dnf -y install centos-release-openstack-victoria
#升级节点上所有的安装包
[root@controller ~]# dnf -y upgrade
#安装openstack客户端和openstack-selinux
[root@controller ~]# dnf -y install python3-openstackclient openstack-selinux
五大服务
Chrony时间同步(双节点)
(1)查看系统是否安装chrony
[root@controller ~]# rpm -qa |grep chrony
#没有的话就安装
[root@controller ~]# dnf -y install chrony
(2)编辑chrony配置文件
#控制节点
[root@controller ~]# vim /etc/chrony.conf
server ntp6.aliyun.com iburst #添加与阿里云时间同步
allow 10.10.10.0/24 #添加
#计算节点
[root@controller ~]# vim /etc/chrony.conf
server controller iburst #添加与控制节点时间同步
(3)重启时间同步服务,设置开机自启
[root@controller ~]# systemctl restart chronyd && systemctl enable chronyd
Mariadb数据库
(1)安装mariadb数据库
[root@controller ~]# dnf -y install mariadb mariadb-server python3-PyMySQL
#启动mariadb数据库
[root@controller ~]# systemctl start mariadb
(2)创建openstack.cnf文件,编辑它
[root@controller ~]# vim /etc/my.cnf.d/openstack.cnf
[mysqld]
bind-address = 10.10.10.10 #绑定IP,如果后面换IP,这行可以删掉
default-storage-engine = innodb
innodb_file_per_table = on
max_connections = 4096
collation-server = utf8_general_ci
character-set-server = utf8
(3)初始化数据库
[root@controller ~]# mysql_secure_installation
Enter current password for root (enter for none): #输入当前用户root密码,若为空直接回车
OK, successfully used password, moving on...
Set root password? [Y/n] y # 是否设置root密码
New password: # 输入新密码
Re-enter new password: # 再次输入新密码
Remove anonymous users? [Y/n] y # 是否删除匿名用户
Disallow root login remotely? [Y/n] n # 是否禁用远程登录
Remove test database and access to it? [Y/n] y # 是否删除数据库并访问它
Reload privilege tables now? [Y/n] y # 是否重新加载权限表
(4)重启数据库服务并设置开机自启
[root@controller ~]# systemctl restart mariadb && systemctl enable mariadb
RabbitMQ消息队列
注意:安装rabbitmq-server时,可能会报错,这是安装源里面没有libSDL,下载所需包,再安装rabbitmq-server就行了
下载命令:wget http://rpmfind.net/linux/centos/8-stream/PowerTools/x86_64/os/Packages/SDL2-2.0.10-2.el8.x86_64.rpm
安装命令:dnf -y install SDL2-2.0.10-2.el8.x86_64.rpm
(1)安装rabbitmq软件包
[root@controller ~]# dnf -y install rabbitmq-server
(2)启动消息队列服务并设置开机自启动
[root@controller ~]# systemctl start rabbitmq-server && systemctl enable rabbitmq-server
(3) 添加openstack用户并设置密码
[root@controller ~]# rabbitmqctl add_user openstack 111111
(4) 配置openstack用户权限
[root@controller ~]# rabbitmqctl set_permissions openstack ".*" ".*" ".*"
(5)启用消息队列Web界面管理插件
[root@controller ~]# rabbitmq-plugins enable rabbitmq_management
#这一步启动后,ss -antlu命令查看端口会有一个15672的端口开启,可通过web界面登录RabbitMQ查看,网站地址:http://10.10.10.10:15672,用户和密码默认都是guest
Memcached缓存
(1)安装memcache软件包
[root@controller ~]# dnf -y install memcached python3-memcached
(2)编辑memcache配置文件
[root@controller ~]# vim /etc/sysconfig/memcached
..........
OPTIONS="-l 127.0.0.1,::1,controller" #修改这一行
(3)重启缓存服务并设置开机自启
[root@controller ~]# systemctl start memcached && systemctl enable memcached
Etcd集群
(1)安装etcd软件包
[root@controller ~]# dnf -y install etcd
(2)编辑etcd配置文件
[root@controller ~]# vim /etc/etcd/etcd.conf
#修改如下
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="http://10.10.10.10:2380"
ETCD_LISTEN_CLIENT_URLS="http://10.10.10.10:2379"
ETCD_NAME="controller"
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://10.10.10.10:2380"
ETCD_ADVERTISE_CLIENT_URLS="http://10.10.10.10:2379"
ETCD_INITIAL_CLUSTER="controller=http://10.10.10.10:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
(3)启动etcd服务并设置开机自启动
[root@controller ~]# systemctl start etcd && systemctl enable etcd
七大组件
Keystone认证
(1)数据库创库授权
#进入数据库
[root@controller ~]# mysql -u root -p111111
#创建keystone数据库
MariaDB [(none)]> CREATE DATABASE keystone;
#授权
MariaDB [(none)]> GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'%' IDENTIFIED BY '111111';
(2)安装keystone软件包
[root@controller ~]# dnf -y install openstack-keystone httpd python3-mod_wsgi
(3)编辑配置文件
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/keystone/keystone.conf /etc/keystone/keystone.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/keystone/keystone.conf.bak >/etc/keystone/keystone.conf
#编辑
[root@controller ~]# vim /etc/keystone/keystone.conf
[database]
connection = mysql+pymysql://keystone:111111@controller/keystone
[token]
provider = fernet
(4)数据库初始化
[root@controller ~]# su -s /bin/sh -c "keystone-manage db_sync" keystone
(5)查看keystone数据库表信息
[root@controller ~]# mysql -uroot -p111111
MariaDB [(none)]> use keystone;
MariaDB [keystone]> show tables;
MariaDB [keystone]> quit
(6)初始化Fernet
[root@controller ~]# keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone
[root@controller ~]# keystone-manage credential_setup --keystone-user keystone --keystone-group keystone
(7)引导身份认证
[root@controller ~]# keystone-manage bootstrap --bootstrap-password 111111
--bootstrap-admin-url http://controller:5000/v3/
--bootstrap-internal-url http://controller:5000/v3/
--bootstrap-public-url http://controller:5000/v3/
--bootstrap-region-id RegionOne
(8)配置Apache HTTP服务
#编辑httpd.conf文件
[root@controller ~]# vim /etc/httpd/conf/httpd.conf
ServerName controller #添加这一行
AllowOverride none
Require all granted #这一行改成这样
#创建wsgi-keystone.conf文件链接
[root@controller ~]# ln -s /usr/share/keystone/wsgi-keystone.conf /etc/httpd/conf.d/
(9)重启httpd服务并设置开机自启动
[root@controller ~]# systemctl restart httpd && systemctl enable httpd
(10)创建admin环境变量脚本
[root@controller ~]# vim /admin-openrc.sh
export OS_USERNAME=admin
export OS_PASSWORD=111111
export OS_PROJECT_NAME=admin
export OS_USER_DOMAIN_NAME=Default
export OS_PROJECT_DOMAIN_NAME=Default
export OS_AUTH_URL=http://controller:5000/v3
export OS_IDENTITY_API_VERSION=3
export OS_IMAGE_API_VERSION=2
#可通过source /admin-openrc.sh命令来导入环境变量,或./admin-openrc.sh命令,如果不想每次手动导入,可以修改.bashrc配置文件实现开机启动导入
[root@controller ~]# vim .bashrc
source /admin-openrc.sh #添加这一行
(11)创建域,项目,用户和角色
#创建域,已有默认域default,自己可随便创一个
[root@controller ~]# openstack domain create --description "An Example Domain" example
#创建service项目
[root@controller ~]# openstack project create --domain default --description "Service Project" service
#创建测试项目
[root@controller ~]# openstack project create --domain default --description "Demo Project" myproject
#创建用户,此命令执行会要求输入密码,输两次即可
[root@controller ~]# openstack user create --domain default --password-prompt myuser
#创建角色
[root@controller ~]# openstack role create myrole
#添加角色与项目,用户绑定
[root@controller ~]# openstack role add --project myproject --user myuser myrole
(12)验证token令牌
[root@controller ~]# openstack token issue
Glance镜像
(1) 数据库创库授权
#进入数据库
[root@controller ~]# mysql -u root -p111111
#创建glance数据库
MariaDB [(none)]> CREATE DATABASE glance;
#授权
MariaDB [(none)]> GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'%' IDENTIFIED BY '111111';
(2) 安装glance软件包
注:安装报错,修改CentOS-Stream-PowerTools.repo源为enable=1,重新安装
[root@controller ~]# dnf install -y openstack-glance
(3) 编辑配置文件
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/glance/glance-api.conf /etc/glance/glance-api.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/glance/glance-api.conf.bak >/etc/glance/glance-api.conf
#编辑
[root@controller ~]# vim /etc/glance/glance-api.conf
[database]
connection = mysql+pymysql://glance:111111@controller/glance
[keystone_authtoken]
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = Default
user_domain_name = Default
project_name = service
username = glance
password = 111111
[paste_deploy]
flavor = keystone
[glance_store]
stores = file,http
default_store = file
filesystem_store_datadir = /var/lib/glance/images/
(4) 数据库初始化
[root@controller ~]# su -s /bin/sh -c "glance-manage db_sync" glance
(5) 查看glance数据库表信息
[root@controller ~]# mysql -uroot -p111111
MariaDB [(none)]> use glance;
MariaDB [keystone]> show tables;
MariaDB [keystone]> quit
(6) 创建glance用户和服务,关联admin角色
#创建glance用户
[root@controller ~]# openstack user create --domain default --password 111111 glance
#关联admin角色
[root@controller ~]# openstack role add --project service --user glance admin
#创建glance服务
[root@controller ~]# openstack service create --name glance --description "OpenStack Image" image
(7) 注册API接口
#public
[root@controller ~]# openstack endpoint create --region RegionOne image public http://controller:9292
#internal
[root@controller ~]# openstack endpoint create --region RegionOne image internal http://controller:9292
#admin
[root@controller ~]# openstack endpoint create --region RegionOne image admin http://controller:9292
(8) 查看服务端点
[root@controller ~]# openstack endpoint list
(9) 启动glance服务并设置开机自启
[root@controller ~]# systemctl start openstack-glance-api && systemctl enable openstack-glance-api
(10) 测试镜像功能
#此次采用的镜像为cirros-0.5.1-x86_64-disk.img,创建命令如下
[root@controller ~]# openstack image create "cirros" --file cirros-0.5.1-x86_64-disk.img --disk-format qcow2 --container-format bare --public
#创建成功后可通过openstack命令查看
[root@controller ~]# openstack image list
#进入glance数据库查看,存放在images表中
[root@controller ~]# mysql -uroot -p111111
MariaDB [(none)]> use glance;
MariaDB [glance]> select * from imagesG;
#在/var/lib/glance/images/目录下可以看到镜像文件,如果要删除此镜像需要删除数据库信息,再删除镜像文件
[root@controller ~]# ls /var/lib/glance/images/
Placement放置
(1) 数据库创库授权
#进入数据库
[root@controller ~]# mysql -u root -p111111
#创建placement数据库
MariaDB [(none)]> CREATE DATABASE placement;
#授权
MariaDB [(none)]> GRANT ALL PRIVILEGES ON placement.* TO 'placement'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON placement.* TO 'placement'@'%' IDENTIFIED BY '111111';
(2) 安装placement软件包
[root@controller ~]# dnf install -y openstack-placement-api
(3) 编辑配置文件
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/placement/placement.conf /etc/placement/placement.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/placement/placement.conf.bak >/etc/placement/placement.conf
#编辑
[root@controller ~]# vim /etc/placement/placement.conf
[placement_database]
connection = mysql+pymysql://placement:111111@controller/placement
[api]
auth_strategy = keystone
[keystone_authtoken]
auth_url = http://controller:5000/v3
memcached_servers = controller:11211
auth_type = password
project_domain_name = Default
user_domain_name = Default
project_name = service
username = placement
password = 111111
(4) 数据库初始化
[root@controller ~]# su -s /bin/sh -c "placement-manage db sync" placement
(5) 查看placement数据库表信息
[root@controller ~]# mysql -uroot -p111111
MariaDB [(none)]> use placement;
MariaDB [keystone]> show tables;
MariaDB [keystone]> quit
(6) 创建placement用户和服务,关联admin角色
#创建placement用户
[root@controller ~]# openstack user create --domain default --password 111111 placement
#关联admin角色
[root@controller ~]# openstack role add --project service --user placement admin
#创建placement服务
[root@controller ~]# openstack service create --name placement --description "Placement API" placement
(7) 注册API接口
#public
[root@controller ~]# openstack endpoint create --region RegionOne placement internal http://controller:8778
#internal
[root@controller ~]# openstack endpoint create --region RegionOne placement public http://controller:8778
#admin
[root@controller ~]# openstack endpoint create --region RegionOne placement admin http://controller:8778
(8) 查看服务端点
[root@controller ~]# openstack endpoint list
(9) 重启httpd服务
[root@controller ~]# systemctl restart httpd
检测placement服务状态
[root@controller ~]# placement-status upgrade check
Nova计算
1,控制节点(1)
(1) 数据库创库授权
#进入数据库
[root@controller ~]# mysql -u root -p111111
#创建nova_api,nova和nova_cell0数据库
MariaDB [(none)]> CREATE DATABASE nova_api;
MariaDB [(none)]> CREATE DATABASE nova;
MariaDB [(none)]> CREATE DATABASE nova_cell0;
#授权
MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_api.* TO 'nova'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_api.* TO 'nova'@'%' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'%' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_cell0.* TO 'nova'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_cell0.* TO 'nova'@'%' IDENTIFIED BY '111111';
(2) 安装nova软件包
[root@controller ~]# dnf install -y openstack-nova-api openstack-nova-conductor openstack-nova-novncproxy openstack-nova-scheduler
(3) 编辑配置文件
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/nova/nova.conf /etc/nova/nova.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/nova/nova.conf.bak >/etc/nova/nova.conf
#编辑
[root@controller ~]# vim /etc/nova/nova.conf
[DEFAULT]
enabled_apis = osapi_compute,metadata
transport_url = rabbit://openstack:111111@controller:5672/
my_ip = 10.10.10.10 #本机IP,如果将来换IP,这地方一定要改
[api_database]
connection = mysql+pymysql://nova:111111@controller/nova_api
[database]
connection = mysql+pymysql://nova:111111@controller/nova
[api]
auth_strategy = keystone
[keystone_authtoken]
www_authenticate_uri = http://controller:5000/
auth_url = http://controller:5000/
memcached_servers = controller:11211
auth_type = password
project_domain_name = Default
user_domain_name = Default
project_name = service
username = nova
password = 111111
[vnc]
enabled = true
server_listen = $my_ip
server_proxyclient_address = $my_ip
[glance]
api_servers = http://controller:9292
[oslo_concurrency]
lock_path = /var/lib/nova/tmp
[placement]
region_name = RegionOne
project_domain_name = Default
project_name = service
auth_type = password
user_domain_name = Default
auth_url = http://controller:5000/v3
username = placement
password = 111111
(4) 数据库初始化
# 同步nova_api数据库
[root@controller ~]# su -s /bin/sh -c "nova-manage api_db sync" nova
# 同步nova_cell0数据库
[root@controller ~]# su -s /bin/sh -c "nova-manage cell_v2 map_cell0" nova
# 创建cell1
[root@controller ~]# su -s /bin/sh -c "nova-manage cell_v2 create_cell --name=cell1 --verbose" nova
# 同步nova数据库
[root@controller ~]# su -s /bin/sh -c "nova-manage db sync" nova
(5) 创建nova用户和服务,关联admin角色
#创建nova用户
[root@controller ~]# openstack user create --domain default --password 111111 nova
#关联admin角色
[root@controller ~]# openstack role add --project service --user nova admin
#创建nova服务
[root@controller ~]# openstack service create --name nova --description "OpenStack Compute" compute
(6) 注册API接口
#public
[root@controller ~]# openstack endpoint create --region RegionOne compute public http://controller:8774/v2.1
#internal
[root@controller ~]# openstack endpoint create --region RegionOne compute internal http://controller:8774/v2.1
#admin
[root@controller ~]# openstack endpoint create --region RegionOne compute admin http://controller:8774/v2.1
(7) 查看服务端点
[root@controller ~]# openstack endpoint list
(8) 验证nova_cell0和cell1是否添加成功
[root@controller ~]# su -s /bin/sh -c "nova-manage cell_v2 list_cells" nova
(9) 启动nova所有服务并设为开机自启
[root@controller ~]# systemctl enable --now openstack-nova-api openstack-nova-scheduler openstack-nova-conductor openstack-nova-novncproxy
(10) 查看nova服务是否启动
[root@controller ~]# nova service-list
#一般只会显示两个服务:nova-scheduler和nova-conductor,这是因为上面这条命令是由nova-api接收,而它控制着nova-scheduler和nova-conductor服务,如果nova-api未开启,那这两个服务也会down掉,nova-novncproxy服务则是通过查看端口号的形式,示例如下:
[root@controller ~]# netstat -lntup | grep 6080
tcp 0 0 0.0.0.0:6080 0.0.0.0:* LISTEN 1456/python3
[root@controller ~]# ps -ef | grep 1456
nova 1456 1 0 18:29 ? 00:00:05 /usr/bin/python3 /usr/bin/nova-novncproxy --web /usr/share/novnc/
root 27724 26054 0 20:51 pts/0 00:00:00 grep --color=auto 1456
(11) 如何通过web界面查看
#如果不配置域名解析,就直接用ip
http://10.10.10.10:6080
#如果要配置域名解析,在电脑C:WindowsSystem32driversetc目录下里面的hosts文件里添加
10.10.10.10 controller
10.10.10.20 compute
#再访问
http://controller:6080
2,计算节点
(1) 安装nova软件包
[root@compute ~]# dnf install -y openstack-nova-compute
(2) 编辑配置文件
#复制备份配置文件并去掉注释
[root@compute ~]# cp /etc/nova/nova.conf /etc/nova/nova.conf.bak
[root@compute ~]# grep -Ev '^$|#' /etc/nova/nova.conf.bak >/etc/nova/nova.conf
#编辑
[root@compute ~]# vim /etc/nova/nova.conf
[DEFAULT]
enabled_apis = osapi_compute,metadata
transport_url = rabbit://openstack:111111@controller
my_ip = 10.10.10.20 #本机IP,如果将来换IP,这地方一定要改
[api]
auth_strategy = keystone
[keystone_authtoken]
www_authenticate_uri = http://controller:5000/
auth_url = http://controller:5000/
memcached_servers = controller:11211
auth_type = password
project_domain_name = Default
user_domain_name = Default
project_name = service
username = nova
password = 111111
[vnc]
enabled = true
server_listen = 0.0.0.0
server_proxyclient_address = $my_ip
novncproxy_base_url = http://controller:6080/vnc_auto.html
[glance]
api_servers = http://controller:9292
[oslo_concurrency]
lock_path = /var/lib/nova/tmp
[placement]
region_name = RegionOne
project_domain_name = Default
project_name = service
auth_type = password
user_domain_name = Default
auth_url = http://controller:5000/v3
username = placement
password = 111111
(3) 确定计算节点是否支持虚拟机的硬件加速
#如果此命令返回值是别的数字,计算节点支持硬件加速;如果此命令返回值是0,计算节点不支持硬件加速,需要配置[libvirt]
[root@compute ~]# egrep -c '(vmx|svm)' /proc/cpuinfo
#配置[libvirt]
[root@compute ~]# vim /etc/nova/nova.conf
[libvirt]
virt_type = qemu
(4) 启动计算节点nova服务并设置开机自启动
[root@compute ~]# systemctl enable --now libvirtd.service openstack-nova-compute.service
控制节点(2)
(5) 将计算节点添加到单元数据库
#确认数据库中存在计算主机
[root@controller ~]# openstack compute service list --service nova-compute
#控制节点发现计算节点
[root@controller ~]# su -s /bin/sh -c "nova-manage cell_v2 discover_hosts --verbose" nova
(6) 设置发现间隔
[root@controller ~]# vim /etc/nova/nova.conf
[scheduler]
discover_hosts_in_cells_interval = 300
Neutron网络
(1) 数据库创库授权
#进入数据库
[root@controller ~]# mysql -u root -p111111
#创建neutron数据库
MariaDB [(none)] CREATE DATABASE neutron;
#授权
MariaDB [(none)]> GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'%' IDENTIFIED BY '111111';
(2) 创建neutron用户和服务,关联admin角色
#创建neutron用户
[root@controller ~]# openstack user create --domain default --password 111111 neutron
#关联admin角色
[root@controller ~]# openstack role add --project service --user neutron admin
#创建neutron服务
[root@controller ~]# openstack service create --name neutron --description "OpenStack Networking" network
(3) 注册API接口
#public
[root@controller ~]# openstack endpoint create --region RegionOne network public http://controller:9696
#internal
[root@controller ~]# openstack endpoint create --region RegionOne network internal http://controller:9696
#admin
[root@controller ~]# openstack endpoint create --region RegionOne network admin http://controller:9696
(4) 查看服务端点
[root@controller ~]# openstack endpoint list
控制节点公有网络
(1) 安装neutron软件包
[root@controller ~]# dnf -y install openstack-neutron openstack-neutron-ml2 openstack-neutron-linuxbridge ebtables
(2) 编辑neutron配置文件
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/neutron.conf /etc/neutron/neutron.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/neutron.conf.bak >/etc/neutron/neutron.conf
#编辑
[root@controller ~]# vim /etc/neutron/neutron.conf
[DEFAULT]
core_plugin = ml2
service_plugins =
transport_url = rabbit://openstack:111111@controller
auth_strategy = keystone
notify_nova_on_port_status_changes = true
notify_nova_on_port_data_changes = true
[database]
connection = mysql+pymysql://neutron:111111@controller/neutron
[keystone_authtoken]
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = neutron
password = 111111
[nova] #如果配置文件没有这个参数,就直接加
auth_url = http://controller:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = nova
password = 111111
[oslo_concurrency]
lock_path = /var/lib/neutron/tmp
(3) 编辑ml2插件
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugins/ml2/ml2_conf.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/ml2_conf.ini.bak >/etc/neutron/plugins/ml2/ml2_conf.ini
#编辑
[root@controller ~]# vim /etc/neutron/plugins/ml2/ml2_conf.ini
[ml2]
type_drivers = flat,vlan
tenant_network_types =
mechanism_drivers = linuxbridge
extension_drivers = port_security
[ml2_type_flat]
flat_networks = provider
[securitygroup]
enable_ipset = true
(4) 配置Linux网桥代理
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/plugins/ml2/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak > /etc/neutron/plugins/ml2/linuxbridge_agent.ini
#编辑
[root@controller ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.ini
[linux_bridge]
physical_interface_mappings = provider:ens34 #这里选择提供给实例的net网卡
[vxlan]
enable_vxlan = false
[securitygroup]
enable_security_group = true
firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
(5) 配置DHCP代理
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/dhcp_agent.ini /etc/neutron/dhcp_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/dhcp_agent.ini.bak >/etc/neutron/dhcp_agent.ini
#编辑
[root@controller ~]# vim /etc/neutron/dhcp_agent.ini
[DEFAULT]
interface_driver = linuxbridge
dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
enable_isolated_metadata = true
(6) 设置网桥过滤器
#修改系统参数配置文件
[root@controller ~]# echo 'net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1' >> /etc/sysctl.conf
#加载br_netfilter模块
[root@controller ~]# modprobe br_netfilter
#检查
[root@controller ~]# sysctl -p
net.bridge.bridge-nf-call-iptables = 1 #出现这个则配置成功
net.bridge.bridge-nf-call-ip6tables = 1 #出现这个则配置成功
(7) 配置元数据代理
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/metadata_agent.ini /etc/neutron/metadata_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/metadata_agent.ini.bak >/etc/neutron/metadata_agent.ini
#编辑
[root@controller ~]# vim /etc/neutron/metadata_agent.ini
[DEFAULT]
nova_metadata_host = controller
metadata_proxy_shared_secret = METADATA_SECRET
#'METADATA_SECRET'为密码,可自行定义。但要与后面配置nova中的元数据参数一致
(8) 配置计算服务以使用网络服务
#在[neutron]部分,配置访问参数,启用元数据代理
[root@controller ~]# vim /etc/nova/nova.conf
[neutron]
auth_url = http://controller:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = neutron
password = 111111
service_metadata_proxy = true
metadata_proxy_shared_secret = METADATA_SECRET #密码要一致
(9) 创建网络服务初始化脚本链接
[root@controller ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini
(10) 数据库初始化
[root@controller ~]# su -s /bin/sh -c "neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head" neutron
(11) 重启nova的API服务
[root@controller ~]# systemctl restart openstack-nova-api.service
(12) 启动neutron服务并设置开机自启
[root@controller ~]# systemctl enable --now neutron-server.service
neutron-linuxbridge-agent.service neutron-dhcp-agent.service
neutron-metadata-agent.service
计算节点公有网络
(1) 安装neutron软件包
[root@compute ~]# dnf install -y openstack-neutron-linuxbridge ebtables ipset
(2) 编辑neutron配置文件
#复制备份配置文件并去掉注释
[root@compute ~]# cp /etc/neutron/neutron.conf /etc/neutron/neutron.conf.bak
[root@compute ~]# grep -Ev '^$|#' /etc/neutron/neutron.conf.bak >/etc/neutron/neutron.conf
#编辑
[root@compute ~]# vim /etc/neutron/neutron.conf
[DEFAULT]
transport_url = rabbit://openstack:111111@controller
auth_strategy = keystone
[keystone_authtoken]
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = neutron
password = 111111
[oslo_concurrency]
lock_path = /var/lib/neutron/tmp
(3) 配置Linux网桥代理
#复制备份配置文件并去掉注释
[root@compute ~]# cp /etc/neutron/plugins/ml2/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak
[root@compute ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak > /etc/neutron/plugins/ml2/linuxbridge_agent.ini
#编辑
[root@controller ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.ini
[linux_bridge]
physical_interface_mappings = provider:ens34 #这里选择提供给实例的net网卡
[vxlan]
enable_vxlan = false
[securitygroup]
enable_security_group = true
firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
(4) 设置网桥过滤器
#修改系统参数配置文件
[root@compute ~]# echo 'net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1' >> /etc/sysctl.conf
#加载br_netfilter模块
[root@compute ~]# modprobe br_netfilter
#检查
[root@compute ~]# sysctl -p
net.bridge.bridge-nf-call-iptables = 1 #出现这个则配置成功
net.bridge.bridge-nf-call-ip6tables = 1 #出现这个则配置成功
(5) 配置计算服务以使用网络服务
#在[neutron]部分,配置访问参数,启用元数据代理
[root@compute ~]# vim /etc/nova/nova.conf
[neutron]
auth_url = http://controller:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = neutron
password = 111111
(6) 重启nova的API服务
[root@compute ~]# systemctl restart openstack-nova-api.service
(7) 启动Linux网桥服务并设置开机自启
[root@compute ~]# systemctl enable neutron-linuxbridge-agent.service
公有网络服务是否正常运行
(8) 控制节点查看网络代理服务列表
#控制节点查看网络代理服务列表
[root@controller ~]# openstack network agent list
#一般成功后会出现Metadata agent,DHCP agent,两个Linux bridge agent一共四个代理,一个Linux bridge agent属于controlller,另一个属于compute
控制节点私有网络
(1) 安装neutron软件包
[root@controller ~]# dnf -y install openstack-neutron openstack-neutron-ml2 openstack-neutron-linuxbridge ebtables
(2) 编辑neutron配置文件
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/neutron.conf /etc/neutron/neutron.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/neutron.conf.bak >/etc/neutron/neutron.conf
#编辑
[root@controller ~]# vim /etc/neutron/neutron.conf
[DEFAULT]
core_plugin = ml2
service_plugins = router
allow_overlapping_ips = true
transport_url = rabbit://openstack:111111@controller
auth_strategy = keystone
notify_nova_on_port_status_changes = true
notify_nova_on_port_data_changes = true
[database]
connection = mysql+pymysql://neutron:111111@controller/neutron
[keystone_authtoken]
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = neutron
password = 111111
[nova] #如果配置文件没有这个参数,就直接加
auth_url = http://controller:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = nova
password = 111111
[oslo_concurrency]
lock_path = /var/lib/neutron/tmp
(3) 编辑ml2插件
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugins/ml2/ml2_conf.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/ml2_conf.ini.bak >/etc/neutron/plugins/ml2/ml2_conf.ini
#编辑
[root@controller ~]# vim /etc/neutron/plugins/ml2/ml2_conf.ini
[ml2]
type_drivers = flat,vlan,vxlan
tenant_network_types = vxlan
mechanism_drivers = linuxbridge,l2population
extension_drivers = port_security
[ml2_type_flat]
flat_networks = provider
[ml2_type_vxlan]
vni_ranges = 1:1000
[securitygroup]
enable_ipset = true
(4) 配置Linux网桥代理
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/plugins/ml2/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak > /etc/neutron/plugins/ml2/linuxbridge_agent.ini
#编辑
[root@controller ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.ini
[linux_bridge]
physical_interface_mappings = provider:ens34 #这里选择提供给实例的net网卡
[vxlan]
enable_vxlan = true
local_ip = 10.10.10.10
l2_population = true
[securitygroup]
enable_security_group = true
firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
(5) 设置网桥过滤器
#修改系统参数配置文件
[root@controller ~]# echo 'net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1' >> /etc/sysctl.conf
#加载br_netfilter模块
[root@controller ~]# modprobe br_netfilter
#检查
[root@controller ~]# sysctl -p
net.bridge.bridge-nf-call-iptables = 1 #出现这个则配置成功
net.bridge.bridge-nf-call-ip6tables = 1 #出现这个则配置成功
(6) 配置DHCP代理
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/dhcp_agent.ini /etc/neutron/dhcp_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/dhcp_agent.ini.bak >/etc/neutron/dhcp_agent.ini
#编辑
[root@controller ~]# vim /etc/neutron/dhcp_agent.ini
[DEFAULT]
interface_driver = linuxbridge
dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
enable_isolated_metadata = true
(7) 配置第三层代理
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/l3_agent.ini /etc/neutron/l3_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/l3_agent.ini.bak > /etc/neutron/l3_agent.ini
#编辑
[root@controller ~]# vim /etc/neutron/l3_agent.ini
[DEFAULT]
interface_driver = linuxbridge
(8) 配置元数据代理
#复制备份配置文件并去掉注释
[root@controller ~]# cp /etc/neutron/metadata_agent.ini /etc/neutron/metadata_agent.ini.bak
[root@controller ~]# grep -Ev '^$|#' /etc/neutron/metadata_agent.ini.bak >/etc/neutron/metadata_agent.ini
#编辑
[root@controller ~]# vim /etc/neutron/metadata_agent.ini
[DEFAULT]
nova_metadata_host = controller
metadata_proxy_shared_secret = METADATA_SECRET
#'METADATA_SECRET'为密码,可自行定义。但要与后面配置nova中的元数据参数一致
(9) 配置计算服务以使用网络服务
#在[neutron]部分,配置访问参数,启用元数据代理
[root@controller ~]# vim /etc/nova/nova.conf
[neutron]
auth_url = http://controller:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = neutron
password = 111111
service_metadata_proxy = true
metadata_proxy_shared_secret = METADATA_SECRET #密码要一致
(10) 创建网络服务初始化脚本链接
[root@controller ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini
(11) 数据库初始化
[root@controller ~]# su -s /bin/sh -c "neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head" neutron
(12) 重启nova的API服务
[root@controller ~]# systemctl restart openstack-nova-api.service
(13) 启动neutron服务并设置开机自启
[root@controller ~]# systemctl enable --now neutron-server.service
neutron-linuxbridge-agent.service neutron-dhcp-agent.service
neutron-metadata-agent.service neutron-l3-agent.service
计算节点私有网络
(1) 安装neutron软件包
[root@compute ~]# dnf install -y openstack-neutron-linuxbridge ebtables ipset
(2) 编辑neutron配置文件
#复制备份配置文件并去掉注释
[root@compute ~]# cp /etc/neutron/neutron.conf /etc/neutron/neutron.conf.bak
[root@compute ~]# grep -Ev '^$|#' /etc/neutron/neutron.conf.bak >/etc/neutron/neutron.conf
#编辑
[root@compute ~]# vim /etc/neutron/neutron.conf
[DEFAULT]
transport_url = rabbit://openstack:111111@controller
auth_strategy = keystone
[keystone_authtoken]
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = neutron
password = 111111
[oslo_concurrency]
lock_path = /var/lib/neutron/tmp
(3) 配置Linux网桥代理
#复制备份配置文件并去掉注释
[root@compute ~]# cp /etc/neutron/plugins/ml2/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak
[root@compute ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak > /etc/neutron/plugins/ml2/linuxbridge_agent.ini
#编辑
[root@controller ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.ini
[linux_bridge]
physical_interface_mappings = provider:ens34 #这里选择提供给实例的net网卡
[vxlan]
enable_vxlan = true
local_ip = 10.10.10.20
l2_population = true
[securitygroup]
enable_security_group = true
firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
(4) 设置网桥过滤器
#修改系统参数配置文件
[root@compute ~]# echo 'net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1' >> /etc/sysctl.conf
#加载br_netfilter模块
[root@compute ~]# modprobe br_netfilter
#检查
[root@compute ~]# sysctl -p
net.bridge.bridge-nf-call-iptables = 1 #出现这个则配置成功
net.bridge.bridge-nf-call-ip6tables = 1 #出现这个则配置成功
(5) 配置计算服务以使用网络服务
#在[neutron]部分,配置访问参数,启用元数据代理
[root@compute ~]# vim /etc/nova/nova.conf
[neutron]
auth_url = http://controller:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = neutron
password = 111111
(6) 重启nova的API服务
[root@compute ~]# systemctl restart openstack-nova-api.service
(7) 启动Linux网桥服务并设置开机自启
[root@compute ~]# systemctl enable neutron-linuxbridge-agent.service
私有网络服务是否正常运行
(8) 控制节点查看网络代理服务列表
#控制节点查看网络代理服务列表
[root@controller ~]# openstack network agent list
#一般成功后会出现Metadata agent,DHCP agent,L3 agent,两个Linux bridge agent一共五个代理,一个Linux bridge agent属于controlller,另一个属于compute
Dashboard仪表盘
(1) 安装dashboard软件包
[root@controller ~]# dnf install -y openstack-dashboard
(2) 编辑dashboard配置文件
#此文件内所有选项与参数用命令模式搜索,有就修改,没有就添加
[root@controller ~]# vim /etc/openstack-dashboard/local_settings
OPENSTACK_HOST = "controller"
#不配域名解析就要把IP写进去
ALLOWED_HOSTS = ['controller','compute','10.10.10.10','10.10.10.20']
SESSION_ENGINE = 'django.contrib.sessions.backends.cache'
CACHES = {
'default': {
'BACKEND': 'django.core.cache.backends.memcached.MemcachedCache',
'LOCATION': 'controller:11211',
},
}
OPENSTACK_KEYSTONE_URL = "http://%s/identity/v3" % OPENSTACK_HOST
OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = True
OPENSTACK_API_VERSIONS = {
"identity": 3,
"image": 2,
"volume": 3,
}
OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = "Default"
OPENSTACK_KEYSTONE_DEFAULT_ROLE = "user"
OPENSTACK_NEUTRON_NETWORK = {
'enable_router': False,
'enable_quotas': False,
'enable_distributed_router': False,
'enable_ha_router': False,
'enable_lb': False,
'enable_firewall': False,
'enable_vpn': False,
'enable_fip_topology_check': False,
}
TIME_ZONE = "Asia/Shanghai"
(3) 配置http服务
[root@controller ~]# vi /etc/httpd/conf.d/openstack-dashboard.conf
WSGIApplicationGroup %{GLOBAL} #添加这行
#编辑dashboard配置文件
[root@controller ~]# vim /etc/openstack-dashboard/local_settings
WEBROOT = '/dashboard/' #添加这行
(4) 重启http和缓存服务
[root@controller ~]# systemctl restart httpd.service memcached.service
(5) 登录web界面
#如果不配置域名解析,就直接用ip
http://10.10.10.10/dashboard
#如果要配置域名解析,在电脑C:WindowsSystem32driversetc目录下里面的hosts文件里添加
10.10.10.10 controller
10.10.10.20 compute
#再访问
http://controller/dashboard
Cinder存储
控制节点
(1) 数据库创库授权
#进入数据库
[root@controller ~]# mysql -u root -p111111
#创建cinder数据库
MariaDB [(none)] CREATE DATABASE cinder;
#授权
MariaDB [(none)]> GRANT ALL PRIVILEGES ON cinder.* TO 'cinder'@'localhost' IDENTIFIED BY '111111';
MariaDB [(none)]> GRANT ALL PRIVILEGES ON cinder.* TO 'cinder'@'%' IDENTIFIED BY '111111';
(2) 编辑配置文件
#复制一份去掉注释
[root@controller ~]# cp /etc/cinder/cinder.conf /etc/cinder/cinder.conf.bak
[root@controller ~]# grep -Ev '^$|#' /etc/cinder/cinder.conf.bak > /etc/cinder/cinder.conf
#编辑
[root@controller ~]# vim /etc/cinder/cinder.conf
[DEFAULT]
transport_url = rabbit://openstack:111111@controller
auth_strategy = keystone
my_ip = 10.10.10.10
[database]
connection = mysql+pymysql://cinder:111111@controller/cinder
[keystone_authtoken]
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = cinder
password = 111111
[oslo_concurrency]
lock_path = /var/lib/cinder/tmp
(3) 数据库初始化
[root@controller ~]# su -s /bin/sh -c "cinder-manage db sync" cinder
(4) 查看cinder数据库表信息
[root@controller ~]# mysql -uroot -p111111
MariaDB [(none)]> use cinder;
MariaDB [cinder]> show tables;
MariaDB [cinder]> quit
(5) 创建cinder用户和服务,关联admin角色
#创建cinder用户
[root@controller ~]# openstack user create --domain default --password 111111 placement
#关联admin角色
[root@controller ~]# openstack role add --project service --user cinder admin
#创建cinderv2,cinderv3服务
[root@controller ~]# openstack service create --name cinderv2 > --description "OpenStack Block Storage" volumev2
[root@controller ~]# openstack service create --name cinderv3 > --description "OpenStack Block Storage" volumev3
(6) 注册API接口
cinderv2的服务端点
#public
[root@controller ~]# openstack endpoint create --region RegionOne
> volumev2 public http://controller:8776/v2/%(project_id)s
#internal
[root@controller ~]# openstack endpoint create --region RegionOne
> volumev2 internal http://controller:8776/v2/%(project_id)s
#admin
[root@controller ~]# openstack endpoint create --region RegionOne
> volumev2 admin http://controller:8776/v2/%(project_id)s
cinderv3的服务端点
#public
[root@controller ~]# openstack endpoint create --region RegionOne
> volumev3 public http://controller:8776/v3/%(project_id)s
#internal
[root@controller ~]# openstack endpoint create --region RegionOne
> volumev3 internal http://controller:8776/v3/%(project_id)s
#admin
[root@controller ~]# openstack endpoint create --region RegionOne
> volumev3 admin http://controller:8776/v3/%(project_id)s
(7) 查看服务端点
[root@controller ~]# openstack endpoint list
(8) 配置计算服务使用块存储
#编辑nova配置文件
[root@controller cinder]# vi /etc/nova/nova.conf
[cinder]
os_region_name = RegionOne
#重启nova
[root@controller ~]# systemctl restart openstack-nova-api.service
(9) 启动cinder服务并设置开机自启
[root@controller ~]# systemctl enable --now openstack-cinder-api.service openstack-cinder-scheduler.service
计算节点(关闭虚拟机添加一块50G硬盘)
(1) 查看磁盘
[root@compute ~]# fdisk --list
(2) 安装 LVM 包
[root@compute ~]# dnf -y install lvm2 device-mapper-persistent-data
(3) 创建 LVM 物理卷/dev/sdb
[root@compute ~]# pvcreate /dev/sdb
(4) 创建 LVM 卷组cinder-volumes
[root@compute ~]# vgcreate cinder-volumes /dev/sdb
(5) 修改LVM配置
#复制一份去掉注释
[root@compute ~]# cp /etc/lvm/lvm.conf /etc/lvm/lvm.conf.bak
[root@compute ~]# grep -Ev '^$|#' /etc/lvm/lvm.conf.bak > /etc/lvm/lvm.conf
#编辑
[root@compute ~]# vi /etc/lvm/lvm.conf
devices {
filter = [ "a/sda/",a/sdb/", "r/.*/"]
}
(6) 安装cinder相关软件包
[root@compute ~]# dnf install -y openstack-cinder targetcli python3-keystone
(7) 编辑cinder配置文件
#复制一份去掉注释
[root@compute ~]# cp /etc/cinder/cinder.conf /etc/cinder/cinder.conf.bak
[root@compute ~]# grep -Ev '^$|#' /etc/cinder/cinder.conf.bak > /etc/cinder/cinder.conf
#编辑
[root@compute ~]# vim /etc/cinder/cinder.conf
[DEFAULT]
transport_url = rabbit://openstack:111111@controller
auth_strategy = keystone
my_ip = 10.10.10.20
enabled_backends = lvm
glance_api_servers = http://controller:9292
[database]
connection = mysql+pymysql://cinder:111111@controller/cinder
[keystone_authtoken]
www_authenticate_uri = http://controller:5000
auth_url = http://controller:5000
memcached_servers = controller:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = cinder
password = 111111
[lvm] #没有就添加
volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
volume_group = cinder-volumes #要与创建的卷组名对应
target_protocol = iscsi
target_helper = lioadm
[oslo_concurrency]
lock_path = /var/lib/cinder/tmp
(8) 启动cinder服务并设置开机自启
[root@compute ~]# systemctl enable --now openstack-cinder-volume.service target.service
(9) 返回控制节点,查看服务列表
[root@controller ~]# openstack volume service list
#显示这样就行
+------------------+-------------+------+---------+-------+----------------------------+
| Binary | Host | Zone | Status | State | Updated At |
+------------------+-------------+------+---------+-------+----------------------------+
| cinder-scheduler | controller | nova | enabled | up | 2023-05-11T08:12:03.000000 |
| cinder-volume | compute@lvm | nova | enabled | up | 2023-05-11T08:12:02.000000 |
+------------------+-------------+------+---------+-------+----------------------------+
至此,openstack云平台搭建V版已全部完成
服务器托管,北京服务器托管,服务器租用 http://www.fwqtg.net
机房租用,北京机房租用,IDC机房托管, http://www.fwqtg.net
相关推荐: 淦,服务器被人传了后门木马。。。
一、webshell是什么?
二、webshell分类
三、webshell处置流程
四、Web日志解析「作者简介」:CSDN top100、阿里云博客专家、华为云享专家、网络安全领域优质创作者 「推荐专栏」:对网络安全感兴趣的小伙伴可以关注专栏《网络安全入门到精通》 今天很暴躁,因为睡眠被打扰了。 一个朋友大半夜打我电话,说她云服务器被人黑了,甩给我个截图。 …