1、借助STM32CubeMX生成系统及外设相关初始化代码。
在以上配置后就可以生成相关初始化代码了。
/* ADC1 init function */
void MX_ADC1_Init(void)
{
/* USER CODE BEGIN ADC1_Init 0 */
/* USER CODE END ADC1_Init 0 */
ADC_ChannelConfTypeDef sConfig = {0};
/* USER CODE BEGIN ADC1_Init 1 */
/* USER CODE END ADC1_Init 1 */
/** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
*/
hadc1.Instance = ADC1;
hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
hadc1.Init.Resolution = ADC_RESOLUTION_12B;
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
hadc1.Init.LowPowerAutoWait = DISABLE;
hadc1.Init.LowPowerAutoPowerOff = DISABLE;
hadc1.Init.ContinuousConvMode = ENABLE;
hadc1.Init.NbrOfConversion = 1;
hadc1.Init.DiscontinuousConvMode = DISABLE;
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
hadc1.Init.DMAContinuousRequests = DISABLE;
hadc1.Init.Overrun = ADC_OVR_DATA_PRESERVED;
hadc1.Init.SamplingTimeCommon1 = ADC_SAMPLETIME_160CYCLES_5;
hadc1.Init.SamplingTimeCommon2 = ADC_SAMPLETIME_160CYCLES_5;
hadc1.Init.OversamplingMode = DISABLE;
hadc1.Init.TriggerFrequencyMode = ADC_TRIGGER_FREQ_HIGH;
if (HAL_ADC_Init(&hadc1) != HAL_OK)
{
Error_Handler();
}
/** Configure Regular Channel
*/
sConfig.Channel = ADC_CHANNEL_TEMPSENSOR;
sConfig.Rank = AD服务器托管网C_REGULAR_RANK_1;
sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_1;
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN ADC1_Init 2 */
/* USER CODE END ADC1_Init 2 */
}
void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
{
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
if(adcHandle->Instance==ADC1)
{
/* USER CODE BEGIN ADC1_MspInit 0 */
/* USER CODE END ADC1_MspInit 0 */
/** Initializes the peripherals clocks
*/
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_SYSCLK;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
}
/* ADC1 clock enable */
__HAL_RCC_ADC_CLK_ENABLE();
/* USER CODE BEGIN ADC1_MspInit 1 */
/* USER CODE END ADC1_MspInit 1 */
}
}
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
{
if(adcHandle->Instance==ADC1)
{
/* USER CODE BEGIN ADC1_MspDeInit 0 */
/* USER CODE END ADC1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_ADC_CLK_DISABLE();
/* USER CODE BEGIN ADC1_MspDeInit 1 */
/* USER CODE END ADC1_MspDeInit 1 */
}
}
//CPU 温度检测功能代码
float TempDectect()
{
float Tmep1 = 0.284;
uint32_服务器托管网t aDsUM = 0;
uint32_t AdcVol = 0.0;
int16_t aDCvALUE = 0;
HAL_ADC_Start(&hadc1); //启动ADC转换
HAL_ADC_PollForConversion(&hadc1,10); //等待转换完成,10ms表示超时时间
aDCvALUE = HAL_ADC_GetValue(&hadc1); //读取ADC转换数据(12位数据)
/*温度公式与参数释义:
TMP = (TS_CAL2_TEMP - TS_CAL1_TEMP)/(TS_CAL2 - TS_CAL1) * (TS_DATA - TS_CAL1) + TS_CAL1_TEMP;
TS_CAL2_TEMP:130
TS_CAL1_TEMP:30
TS_CAL2:0x56A(根据手册得知值存储在flash地址0x0x1FFF75CA - 0x1FFF75CB)需要读出来
TS_CAL1:0x40A(根据手册得知值存储在flash地址0x0x1FFF75A8 - 0x1FFF75A9)需要读出来
TS_DATA:是由 ADC 转换得到的实际温度传感器输出值
*/
//Tmep1 = (130-30)/(1386-1034); //计算一直为0,所以将其设为恒定值
Tmep = (Tmep1 * (aDCvALUE - 1034)) + 30;
return Tmep;
}
服务器托管,北京服务器托管,服务器租用 http://www.fwqtg.net
ES6 或 ECMAScript 2015 是 ECMAScript 语言规范标准的第六版,也是主要版本。它定义了 JavaScript 的实现标准,并且比之前的 ES5 版本更加流行。 ES6 对 JavaScript 语言进行了重大更改。它带来了一些新功能…